B3/30AC

Bendi VNA Electric Warehouse Forklift

The Bendi model B3/30AC works in aisles as narrow as 72″ (1.8M), has a basic capacity of 3,000 lbs. (1361kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M).

• A 3-wheel articulating forklift with a single poly front drive tire and solid rubber rear tires.
• Front articulation of 200°, narrow mast and a compact front end allow easy stacking in Very Narrow Aisles.
• Can work inside and outside on paved surfaces.
• Does all the jobs of a reach truck in aisles at least 40″ (1M) smaller.

B30AC/B40AC

Multipurpose Narrow Aisle Articulating Electric Forklift

The Bendi model B30AC/B40AC works in aisles as narrow as *78″ (1.98M), has a basic capacity starting at 3,000 lbs. (1361 kg) at 24″ (600mm) load center and has lift heights available to 26′ (7.92M).

• A 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires.
• Excellent traction, braking, and power enable climbing steep ramps with loads.
• Three or four stage masts are available making this unit excellent for loading/unloading trailers and containers.
• Can also work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors.
• Does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.

B40AC-DR B50AC-DR

Bendi Electric Deep Reach Forklift

The Bendi model B40AC-DR / B50AC-DR will stack loads two deep in aisles as narrow as *96” (2.4 M) has a basic starting capacity of 2,500 lbs. (1,136 kg) at 24” (600 mm) load center and has lift heights available to 35′ 5″ (10.80 M). The reach from face to mast is 52” (1,321 mm) and the integral pantograph reach stroke is 41” (1,041 mm) The B40AC-DR / B50AC-DR has a 33” (838 mm) wide tilting and side shifting fork carriage.

• A 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires.
• Can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors.
• Does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

B40i5

Bendi Rear Wheel Drive Narrow Aisle Multipurpose LP Gas Forklift

The Bendi model B40i5 works in aisles as narrow as *78″ (1.98M), has a basic capacity of 4,000 lbs. (1814kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M). The LP Gas engine provides the ability to run 24/7 without battery changing or charging.

• A 4-wheel articulating forklift with dual rear-drive tires and soft-poly front load tires.
• The hydrostatic drive provides excellent traction and braking, high-speed capability and power to enable climbing steep ramps with loads.
• Three or four stage masts are available making this unit excellent for loading/unloading trailers, containers and highway trailers.
• Can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors.
• Does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.